Note that using the smallest grout possible will increase installation time. The Tile Council of North America recommends at least a quarter-inch gap between the tile floor and the walls. Never fill this gap with grout, because tile grout is not flexible. Instead, fill it with an elastic material capable of sustaining the movement of the floor and the movement of the wall. Going darker or lighter with the grout , to add more or less contrast, will make the tile pop more and more.
A soft gray just a few shades darker than the tile is a popular choice because it highlights a tile pattern without shouting for attention. Special types, such as slate or quarry tiles, often do not have edges uniform enough to look good with tight spacing. Rectified tiles are perfectly uniform, with precisely defined edges, requiring the least amount of grout. Examine the edges of the tiles.
Tile adhesive forms the bed for fixing tiles , while tile grout fills the gaps in between the tiles. A grout is any viscous, packable material that can be used to fill the space between two elements for bonding them or to create a water-tight seal.
Grouting of tile is the last process when installing tiles. Don't ever lay tile without grout , the tile will prematurely crack and chip rubbing against each other. Thin set mortar will hold it tight enough it would not move and chip.
Grout is a thin mortar used for filling spaces between tiles [source: Merriam Webster]. Grout does not strengthen or hold the tiles in any way. Rather, it prevents water from getting between the tiles and gives an aesthetically pleasing finished look to the tiled area.
Tiling the Wall First So, to accommodate the flooring tile , many like to leave a small gap between the last row of wall tile and floor. Some like to use a ledger or other space saver to indicate where your missing row should be. To give the edge a clean, water-tight finish , place a piece of masking tape one grout joint away from the edge of the last tile. Fill this gap between the tile and the masking tape with a smooth bead of caulk. This will finish the edge without extra tiles.
Most floors are not level. Grouting the walls first is generally the way to go when grouting your shower or bathroom area. This belief is mostly a matter of convenience when saving yourself the effort to protect your floor. You could go through the extra effort of protecting your floor, or you could get your walls done first. There is debate on both sides of the argument, and some experts will fall on either side.
Feel free to discuss the matter with your contractor. These gaps between tiles are the portion you will be filling with grout and are subsequently known as the grout lines.
The amount of space you should have between your tiles varies based on a few factors, including:. Standard practice for grout lines is millimeters for floor tiles and millimeters for wall tiles. The vital difference in tiles in regards to grout lines is whether or not you use rectified tiles. This fact means your grout lines will not need to vary, however, and can be on the thinner side, closer to millimeters.
Tilers use grout lines to hide inconsistently sized tiles, which is essential when using non-rectified tiles as they will be slightly different sizes. This instance is when the grout lines tend to be thicker, more near the millimeters end of things. If these tiles were left to butt up against one another without grout lines, the variation would add up across the installation, leading to alignment issues.
Grouting too soon before your tile has set will only lead to damages and compromise the integrity of your project. An important thing to remember is that a dry edge around a tile does not mean the whole thing is necessarily set. Because the airflow around a tile and underneath it is so different, you can easily see several dry edges around your tiles and still have moisture underneath. Depending on the mortar you use, it can take 48 hours or longer before you can start grouting your floors and walls.
Unless using particular materials, this will be a timely process. Tiles are an excellent way to customize your walls and floors while also protecting your walls and floors from the elements that might wear at them. We hope this article has informed and encouraged you to tile your walls and floors safely and correctly. Spread the adhesive onto the floor with a 10mm notched trowel, spreading only one square metre at a time. Press the tiles firmly into the adhesive bed.
Do not fix tiles with tight joints. Ensure that the tiles are firmly pressed into the adhesive bed and that there are no voids beneath the tiles. They may be adjusted to maintain true, even joint lines.
Complete the section up to the nearest full tile. Leave all cuts until you near the end of your project. For a truly professional finish, hire one of our tile cutters to complete the job. Grouting Filling the Tile Joints. Grouting the joints can commence as soon as the tiles are rigid and cannot be disturbed. We recommend Kemgrout for filling the joints. Work the grout into the joints using a squeegee or sponge.
Remove all surplus grout from the tiles using a sponge before it dries. To finish, polish the tile with a soft cloth.
When grouting over a flexing floor, use a printer and grout additive in place of water. Make sure that the wall surface is level, firm and rigid. Ensure that the surface to be tiled is clean and free from any dust, oil, grease, etc. Plasterboard and cement sheets should be primed with primer prior to tiling. Spread approximately one square metre of adhesive onto the wall using the straight edge of a 6mm notched trowel, notching the adhesive in a horizontal direction. Press the dry tiles into the ribs of the adhesives, ensuring that the entire back of the tile is firmly attached to the adhesive.
0コメント